Tascam Sonicview 16 User Manual

4 – Mixer configuration and settings
Function Parameter1 Parameter2 Parameter3 Function explanation
Snapshot
Recall
Prev
Switch the number of the Snapshot available
for RECALL shown at the top of the Menu
Screen to the Snapshot that is one earlier, and
then recall it. (See “Snapshot functions” on
page 164.)
No 1-128/P001-Pxxx
Recall a snapshot by number. (See “Snapshot
functions” on page 164.)
+Target Key
Press this simultaneously with a key that has
Function set to Snapshot and Parameter 1 set
to Target to recall that set snapshot number.
(See “Snapshot functions” on page 164.)
Store
Selected
Store the Snapshot available for STORE shown
at the top of the Menu Screen. (See “Snapshot
functions” on page 164.)
No 1-128
Store a snapshot by number. (See “Snapshot
functions” on page 164.)
+Target Key
Press this simultaneously with a key that has
Function set to Snapshot and Parameter 1 set
to Target to store in that set snapshot number.
(See “Snapshot functions” on page 164.)
However, even when Function is set to
Snapshot and Parameter 1 is set to Target, this
will not work if the key assigned to Parameter
2 as “Next” or “Prev” is pressed at the same
time.
Target
Selected
Press simultaneously with a key assigned to a
+Target Key function to STORE to or RECALL
from the Snapshot number shown at the top
of the Menu Screen.
Next
Press simultaneously with a key assigned to
a +Target Key function to make the Snapshot
number target for STORE/RECALL one after
that shown at the top of the MENU Screen
subject to RECALL.
Prev
Press simultaneously with a key assigned to
a +Target Key function to make the Snapshot
number target for STORE/RECALL one before
that shown at the top of the MENU Screen
subject to RECALL.
No 1-128/P001-Pxxx
Press simultaneously with a key assigned to a
+Target Key function to STORE to or RECALL
from the specified Snapshot number.
Undo/Redo Undo Color Redo Color
Undo/redo Snapshot RECALL operations. (See
“Snapshot functions” on page 164.)
When undoing is possible, the USER KEY that
this function is assigned to will light in the
color set by Parameter 2: Undo Color. When
redoing is possible, the USER KEY that this
function is assigned to will light in the color
set by Parameter 3: Redo Color. (Parameters 2
and 3 can only be set to USER KEY.)
Screen
TALKBACK/
OSCILLATOR
Show the TALKBACK/OSCILLATOR page of
the MONITOR SETUP Screen on the rightmost
touchscreen and light the corresponding
USER KEY. When this screen is open, pressing
a corresponding USER KEY will close it.
METER
ALL LAYER
OUTPUT
LAYER1–7
LAST TAB
Show the page of the METER Screen specified
by Parameter 2 on the rightmost touchscreen
and light the corresponding USER KEY. When
this screen is open, pressing a corresponding
USER KEY will close it.
RECORDER/PLAYER
Show the RECORDER PLAYER Screen on the
right touchscreen and light the corresponding
USER KEY. When this screen is open, pressing
the corresponding USER KEY will close it.
TASCAM Sonicview 16/Sonicview 24 V1.1.0 43

Tascam Sonicview 16 Specifications

General

Brand	Tascam
Model	Sonicview 16
Category	Music Mixer
Language	English