Home Network
Power Wall Plug Repeater 12
9. Click the Select button of the network, and click Connect. The screen will
revert back to previous page.
10. Enter the Authentication Type and Password (if any), then click Apply. The
device will reboot and establish your connection.
NOTE:
• Once your device is connected to the router, it will be assigned a new IP
address based on the router DHCP settings. See your router documentation
to determine the new IP address of your device. This address will be used to
access the web configuration page of your device, if needed.
2.2 Connecting Wireless Clients
To connect wireless devices, open the wireless utility on your wireless device and
select the default SSID of your device is “TCHREP2.4G958CD8” (2.4Ghz) or
“TCHREP5G958CD8” (5Ghz). By default, the password is empty.
To Next Page
Loading...
Need help?
General