Configure the Computer
Power Wall Plug Repeater 37
Appendix
A. Configure the Computer
This chapter will guide you on how to configure your computer according to the
operating system you are using.
Windows
XP, see below.
Windows
Vista, see page 16.
Windows
7, see page 16.
Windows XP
If you are using Windows
XP, follow the instructions below to configure your
computer.
1. Click Start > Control Panel > Network
Connections.
2. Right-click Local Area Connection, then click
Properties.
3. On the network components list, make sure
that
button.
4. Select Internet Protocol (TCP/IP), and then
click Properties.
5. On the General tab, select Obtain an IP
Address automatically and Obtain DNS
server address automatically.
6. Click
To Next Page
Loading...
Need help?
General