Getting Acquain
tedwithYourInstrument
Status Bar
The Status Bar has two functions. It displays the status of the instrument, such as Sampling Rate, Run State, and Run Mode.
It also has action buttons, such as Force Trigger, Force Event, All Outputs On/Off, and Run.
1. Sampling Rate Sampling rate setting is displayed.
2. Run Status Instrument status (Running or Stopped) is displayed.
3. Run Mode Run Mode is displayed.
4. Force Tri
gger button
Same function as the front-panel Force Trigger button.
5. Force Eve
nt button
Same function as the front-panel Force Event button.
6. All Outputs On/Off button Same function as the front-panel All Outputs On/Off button.
7. Run but
ton
Same function as the front-panel Run button.
AWG5000 and AWG7000 Series Quick Start User Manual 27
To Next Page
Loading...
Need help?
General
