Sequence
Accessing Sequence Elements Outside the Display Area
When you create a long sequence, the Sequence window cannot display the whole sequence elements. You can use the G o
To dialog box to move to a specified element that is not displayed in the window.
1. After creating a s equence, select View >
Go To or select Go To from the popup
menu.
Thedialogboxshowninstep2is
displayed.
2. Select Index No as a Go To target.
3. Enter a value.
4. Select OK intheGoTodialogbox.The
display will jump to the s pecifi ed position.
Quic
kTip
Yo u can also use the Go To dialog box in the Waveform or Waveform List window.
78 AWG5000 and AWG7000 Series Quick Start User Manual
To Next Page
Loading...
Need help?
General
