Tektronix AWG7082C User Manual

Troubleshooting
Table 4-7: Calibration error codes (cont.)
Error code Error log message
Possible defect
on board Note
220000004
HwExecMarkerDelayCal (channel=1) A maximum value
is smaller than 300ps at coarse=15.
AWG12G AWG12G: U100A
220000005
HwExecMarkerDelayCal (channel=2) A maximum value
is smaller than 300ps at coarse=15.
AWG12G AWG12G: U100B
220000006
HwExecMarkerDelayCal (channel=1) There are not
data in ascending order coarse=%d
AWG12G AWG12G: U1000, U100A, U195A
220000007
HwExecMarkerDelayCal (channel=2) There are not
data in ascending order coarse=%d
AWG12G AWG12G: U1000, U100B, U195B
231000000
N/A AWG12G AWG12G:U100A/B, U4000, U1040
241000000
N/A AWG12G AWG12G: U100A/B, U4000
251000000
The Cal value is not found.(10G-Write) AWG12G AWG12G:U1000, U400A/B
251000001
The Cal value is not found.(8G -Write) AWG12G AWG12G:U1000, U400A/B
251000002
The Cal value is not found.(10G-Read) AWG12G AWG12G:U1000, U400A/B
251000004
The Cal value is not found.(Waveform RAM Write
Timing CH1)
AWG12G AWG12G:U400A, U500A , U510A
251000005
The Cal value is not found.(Waveform RAM Write
Timing CH2)
AWG12G AWG12G:U400A, U500A , U510B
251000006
Invalid NG Areas.(10G-Write) AWG12G AWG12G:U1000, U400A/B
251000007
Invalid NG Areas.(8G-Write) AWG12G AWG12G:U1000, U400A/B
251000008
The Cal value is not found.(12G-Write) AWG12G AWG12G:U1000, U400A/B
251000009
The Cal value is not found.(12G-Read) AWG12G AWG12G:U1000, U400A/B
2510000010
Invalid NG Areas.(12G-Write) AWG12G AWG12G:U1000, U400A/B
260000200
Waveform write error. AWG12G AWG12G: U400, U500, U510
260000001
The C al value is not found.
(ch1_ram_address_timing_1@10GHz)
AWG12G AWG12G: U400A, U500A, U510A
260000002
The C al value is not found.
(ch2_ram_address_timing_1@10GHz)
AWG12G AWG12G: U400B, U500B, U510B
260000003
The C al value is not found.
(ch1_ram_address_timing_1@8GHz)
AWG12G AWG12G: U400A, U500A, U510A
260000004
The C al value is not found.
(ch2_ram_address_timing_1@8GHz)
AWG12G AWG12G: U400B, U500B, U510B
260000005
The C al value is not found.
(ch1_ram_data_timing_1@10GHz)
AWG12G AWG12G: U400A, U500A, U510A
260000006
The C al value is not found.
(ch2_ram_data_timing_1@10GHz)
AWG12G AWG12G: U400B, U500B, U510B
260000007
The C al value is not found.
(ch1_ram_data_timing_2@8GHz)
AWG12G AWG12G: U400A, U500A, U510A
260000008
The C al value is not found.
(ch2_ram_data_timing_2@8GHz)
AWG12G AWG12G: U400B, U500B, U510B
4–66 AWG7000B and AWG7000C Series Service Manual

Tektronix AWG7082C Specifications

General

Brand	Tektronix
Model	AWG7082C
Category	Portable Generator
Language	English