Analyze Waveform Data
2. Push Cursors again.
In the example, two vertical cursors appear
on the selected screen waveform. As you
turn multipurpose knob a, you move on e
cursor to the right or left. As you turn knob
b, you move the other cursor.
If you c ha nge the selected waveform by
pushing the front-panel 1, 2, 3, 4, M,or
R button, both cursors jump to the new
selected waveform.
3. Push Select.
This turns the cursor linking on and off. If
linking is on, turning multipurpose kn ob a
moves the two cursors together. Turning
multipurpose knob b adjusts the time
between the cursors.
172 DPO3000 Series Oscilloscopes User Ma nual
To Next Page
Loading...
Need help?
General
