Installation
7. Start your browser on your remote computer.
In the browser address line, enter the IP
address or, if DHCP is set to On in the
oscilloscope, simply enter the instrument
name.
8. You should now see the e*Scope screen
showing the oscilloscope display, on your Web
browser.
If e*Scop e does not work, rerun the procedure.
If it still d oes not work, contact qualified se rvice
personnel.
Connecting a USB Keyboard to Your Oscilloscope
You can connect a US-style USB keyboard to a USB Host port on the rear or front panel o f the oscilloscope. The oscilloscope will
detect the keyboard, even if it is plugged in while the oscilloscope is powered on.
You can use the keyboard to quickly create names or labels. You can b ring up the Label menu throu gh the lower-bezel label button
of the Channel or Bus menus. Use the arrow keys on the keyboard to move the insertion point, and then type in a name or label.
Labeling channels and buses makes the information on the screen easier to identify.
48 DPO3000 Series Oscilloscopes User Ma nual
To Next Page
Loading...
Need help?
General
