Tektronix DPO3000 Series User Manual

Installation
Installing an Application Module
CAUTION. To avoid damag e to the oscilloscope or application m o dul e, observe ESD (electrostatic discharge) precautions.
(See page 16, Powering On the Oscilloscope.)
Turn off the o scilloscope power while removing or adding an application module.
(See page 18, Powering Off the Oscilloscope.)
Optional application module packages extend the cap ability of your oscilloscope. You can install up to four application modules at
one time. Application modules go in to the two s lots with windows in the upper righ t corner of the front pane l. Two additional slots
are directly behind the two that you can see. To use these slots, install the module with the label facing a wa y from you.
Refer to the Tektronix 3000 Series Oscilloscopes A pplication Module Installation Instructions that came with you r application module
for instructions on installing and testing an application module.
NOTE. If you remove an application module, the features provided by the application module become unavailable. To restore the
features, turn off the oscilloscope power, reinstall the module and turn on the oscilloscope power.
DPO3000 Series Oscilloscopes User Manua l 25

Tektronix DPO3000 Series Specifications

General

Brand	Tektronix
Model	DPO3000 Series
Category	Test Equipment
Language	English