Analyze Waveform Data
3. Use the side-bezel men u and the multipurpose
knobs to adjust the vertical and horizontal
settings of the reference wavefo rm.
R1
Vertical
0.00 div
100 mV/div
Horizontal
0.00 s
4.00 μs/div
Quick Tips
Selecting and Disp laying Referenc e Waveforms. You can display all the reference waveforms at the same time. Push the
appropriate screen button to se lect a particular re ference waveform.
Removing Reference Waveforms from the Display. To remove a reference waveform from the display, push the front-panel
R button to access the lower-bezel menu. Th en push the a s so cia ted button from the lower-bezel menu to turn it off.
Scaling and Positionin g a Reference Waveform. You c an position and scale a reference wa v eform independently from
all other displayed waveforms. Select the refe rence wave form a nd th en adjust it with a multipurpose knob. You can d o this
whether acquisition is running or not.
If a ref erence waveform is selected, scaling and repositioning of the re ference wa veform operates the s ame way whether zoom
is turned on or off.
188 DPO3000 Series Oscilloscopes User Ma nual
To Next Page
Loading...
Need help?
General
