Tektronix DPO3000 Series User Manual

Application E xamp les
Basic Strategy
First, you will display and acquire the bus signal by setting up the bus parameters and trigger. Then, you will search through each
packet with the search/mark functions.
NOTE. Triggering on I
2
C, SPI, CAN, LIN, RS-232, RS-422, RS-485 , and UART bus signals requires use of an appropriate
DPO3EMBD, DPO3AUTO, or DPO3COMP Serial Triggering and Analysis Module.
264 DPO3000 Series Oscilloscopes User Ma nual

Tektronix DPO3000 Series Specifications

General

Brand	Tektronix
Model	DPO3000 Series
Category	Test Equipment
Language	English