Tektronix DPO3000 Series User Manual

Installation
2. Connect the oscilloscope to your computer
with the appropriate USB or Ethernet cable.
To commun icate between the oscilloscope and
a GPIB system, connect the oscilloscope to
the TEK-USB-488 GPIB-to-USB Adapter with
a USB cable. Then connect the adapter to
your GPIB system with a GPIB cable. Cycle
the power on the oscilloscope.
DPO3000 Series Oscilloscopes User Manua l 41

Tektronix DPO3000 Series Specifications

General

Brand	Tektronix
Model	DPO3000 Series
Category	Test Equipment
Language	English