Get Acquainted with the Instrume nt
11. Measurement readouts show the selected
measurements. You c a n select up to four
measurements to display at one time.
A
symbol appears instead of the
expected numerical measurement if a
vertical clipping condition exists. Part of the
waveform is above or below the display. To
obtain a proper numerical measure ment,
turn the vertical scale and position knobs
to make all of the wa veform appear in the
display.
12. The auxiliary waveform readouts show the
vertical and horizontal scale factors of the
math and reference waveforms.
13. The channel reado ut shows the channel
scale factor (per division), coupling, invert,
and bandwidth s tatus. Adjust with the
Vertical Scale knob and the channel 1, 2,
3,or4 menus.
70 DPO3000 Series Oscilloscopes User Ma nual
To Next Page
Loading...
Need help?
General
