Acquire the Signal
Quick Tip
Use the zoom feature to see multiple cycles of your signal in the uppe r part, and a single cycle in the lower part of the display.
(See page 189, Using Wave Inspector to Mana ge Long Record Length Waveforms.)
Labeling Channels and Buses
You can add a label to the channels and buse s shown on the display for easy identi fication. The label is placed on the waveform
baseline indicator in the left side of the screen. The label can have up to 32 characters.
To label a channel or bus, follow these steps:
1. Push a front panel button for an input channel
or a bus.
DPO3000 Series Oscilloscopes User Manua l 79
To Next Page
Loading...
Need help?
General
