MSO/DPO5054B 50 Ω termination
Vertical Setting Full BW 250 MHz BW 20 MHz BW
1 V/div 50.0 50.0 40.0
Delay between channels, full
bandwidth, typical
≤100 ps between any two channels with input impedance set to 50 Ω, DC coupling, with equal
volts/division setting or above 10 mV/div
All settings in the instrument can be manually time aligned using the Probe Deskew function
Deskew range –75 ns to +75 ns
Crosstalk channel isolation ≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated bandwidth for any two channels
having equal Volts/Div settings
TekVPI interface The probe interface allows installing, powering, compensating, and controlling a wide range of
probes offering a variety of features.
The interface is available on all front panel inputs including Aux In. Aux In only provides 1 MΩ input
impedance and does not offer 50 Ω as the other input channels do.
Total probe power Five TekVPI-compliant probe interfaces (one per channel)
15 W maximum internal probe power (12 W maximum with firmware versions <6.4.0)
Provision for 50 W probe power with 119-7465-00 TekVPI External Power Supply
Probe power per channel
Voltage Max Amperage Voltage Tolerance
5 V 50 mA (250 mW) ±5%
12 V 2 A (24 W) ±10%
Analog channel input and vertical specification (cont.) Specifications (MSO/DPO5000/B Series)
MSO70000C/DX, DPO70000C/DX, DPO7000C, MSO5000/B, DPO5000/B Series 85
To Next Page
Loading...
Need help?
General
