Specifications
Table 34: Pream
p(Option50/51)
Characteristic Description
Noise Figure
<7 dB at 2 GHz (Opt. 50)
<10 dB at 15 GHz (Opt. 51)
<13 dB at 26.5
GHz (Opt. 51)
Bandwidth
1MHzto6.2G
Hz (Opt. 50)
1 MHz to 26.5 GHz (Opt. 51)
Gain, nominal 20 dB at 2 GHz (Opt. 50)
20 dB at 10 GHz (Opt. 51)
Table 35: Digital IQ output
Characteristic Min
Differential O utput voltage magnitude (R
LOAD
= 100 )
Min: 225 mV
Max: 500 mV
Common mode output voltage
Min: 1.125 V
Max: 1.375 V
Output Data Rate 200 MSPS on both I and Q outputs
Control Output, nominal Clock: LVDS, Max 50 MHz ( 200 MHz, Opt. B85, B125, B16x)
DV (Data Valid), MSW (Most Significant Word) Indicators: LVDS
Control Input, nominal IQ Data Output Enabled and connecting GND enables output
Clock Rising Edge to Data Transition Time
(Hold Time)
8.4 ns (Std and Opt. B40)
1.23 ns (Opt B85, B125, and B16x)
Data Transition to Clock Rising Edge (Setup
Time)
8.2 ns (Std and Opt. B40)
1.20 ns (Opt B85, B125, and B16x)
1
LVDS signaling - ANSI EIA/TIA-644 standard
Table 36: 28 Volt noise source drive output
Characteristic Description
Output Level, nominal 28 VDC @ 140 mA
Output voltage turn ON/OFF time Turn ON: 100 s
Turn OFF: 500 s
42 RSA5100B Series Technical Reference
To Next Page
Loading...
Need help?
General
