Performance Tests
TDS 500D, TDS 600C, TDS 700D & TDS 714L Performance Verification and Specifications
1–37
H Repeat substeps b through f until all vertical scale settings listed in
Table 1–2, are checked for the channel under test.
Align the active cursor
over the waveform.
1
Read the
measurement
results.
2
Figure 1–4: Measurement of DC offset accuracy at zero setting – TDS 684C shown
g. Test all channels: Repeat substeps a through f for all input channels.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
