Tektronix TG8000 Technical Reference

Using T G Setup to set parameters
Starting and e
xiting TG Setup
When you complete the installation procedure, you can use any of the following
methods to start the TG Setup application:
Double-click the TGSetup.exe shortcut icon on the PC desktop that you
created during the installation procedure.
Double-click the TGSetup.exe file name in the Program Manager window.
Select TGSetup from the Start - Programs menu.
To exit the TG Setup application, select File > Exit in the application window.
NOTE. When you start the TG Setup application, the TG8000 front-panel are
disabled once the application window appears. (See Figure 2.)
Elements of the TG Setup window
The fol
lowing figure shows the TG Setup application window. For description of
the elements in the application window refer to the following table.
F
igure 2: TG Setup application window
TG8000 Multiformat Test Signal Generator PC Tools Technical Reference 3

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English