151
8.5 MAC filter
This function is available only when the device works in WISP or Router mode.
8.5.1 Overview
The MAC Filter function enables you to allow or disallow the devices, such as computers, laptops,
tablets, and smart phones, to access the internet via the device based on their MAC addresses.
Choose Advanced > MAC Filter to enter the page.
The function is disabled by default.
8.5.2 Configure MAC filter
Step 1 Start a web browser on the computer connected to the CPE, visit 192.168.2.1 and choose
Advanced > MAC Filter.
Step 2 Select a MAC filter mode, Disallow or Allow.
Step 3 Optional. Enter a Remark for the rule, such as somebody’s device.
Step 4 Enter the MAC Address of the client to which this rule applies.
Step 5 Specify a period at which the rule takes effect.
Step 6 Tick the dates on which the rule takes effect.
Step 7 Click Add.
To Next Page
Loading...
Need help?
General
