173
9 Tools
9.1 Date & time
This module enables you to set the system time of the device.
Ensure that the system time of the device is correct, so that logs can be recorded correctly and the
reboot schedule can be executed correctly.
Choose Tools > Date & Time to enter the page.
The device allows you to set the system time by synchronizing the time with the internet or
manually setting the time. By default, it is configured to synchronize the system time with the
internet.
9.1.1 Synchronized with the Internet
The device automatically synchronizes its system time with a time server of the internet. This
enables the device to automatically correct its system time after being connected to the internet.
For details about how to connect the CPE to the internet, refer to the configuration procedure of
corresponding mode in Quick Setup.
To Next Page
Loading...
Need help?
General
