Wireless N300 Home Router
44
Note:
1. WDS feature can only be implemented between 2 WDS-capable wireless
devices. Plus, SSID, channel, security settings and security key must be
exactly the same on both such devices.
2. To ensure a proper wireless connection, do not change any settings on
the two devices after WDS is successfully implemented.
4.2 Wireless Security
This section allows you to secure your wireless network and block
unauthorized accesses and malicious packet sniffing. To encrypt your
wireless network, do as follows:
1. Select the wireless network (SSID) you wish to encrypt.
2. Disable WPS. (WPS is enabled on the router by default. If you want to
use other security modes, you must first disable the WPS.)
3. Select a proper security mode and cipher type (also known as WPA
Algorithm or WPA Encryption Type). WPA-PSK and AES are
recommended by system default. (5 security modes are available for
your selection. Among them, WPA-PSK outstands with greater
compatibility and security. For more information of other security modes,
see appendix 2) Specify a security key that includes at least 8
characters.
4. Click OK to complete your settings.
To Next Page
Loading...
Need help?
General
