Wireless N300 Home Router
59
Chapter 7 Security
7.1 URL Filter
To better control LAN PCs, you can use the URL filter functionality to allow or
disallow such PCs to access certain websites within a specified time range.
1. Filter Mode: Select a proper filter mode, say, Forbid Only (or
Forbid/Deny).
2. Access Policy: Select an access policy number, say, 1, from the
drop-down list.
3. Policy Name: Briefly describe the current rule, say, youtube, (It can
only consist of numbers, letters, or underscore).
4. Start IP/End IP: Enter the same IP address or 2 different IP addresses
in both boxes to specify a single PC or a range of PCs for the current rule
to apply to.
5. URL Character String: Enter the domain name you wish to filter out,
say, youtube.
6. Time: Specify a time period for a current rule to take effect. If the field
is set to 0:00-0:00, the rule will be applied 24hrs/day.
7. Day(s): Select a day or several days for a current rule to take effect. If
Sun-Sat is selected, the rule will apply 7days/week.
8. Enable: Check/uncheck to enable/disable the feature.
9. OK: Click to activate your settings.
Example:
If you want to disallow all computers on your LAN to access youtube.com
from 8：00 to 18：00 during working days: Monday- Friday, then do as
follows:
To Next Page
Loading...
Need help?
General
