Tenda W330R User Manual

Wireless-N Broadband Router
Advanced Wireless Settings
This section is to configure
the advanced wireless
setting of the Router,
including the Radio
Preamble, 802.11g/n Rate,
Fragmentation Threshold,
RTS Threshold , Beacon
Period and DTIM Interval.
BG protection Mode: Auto
by default. You can select
On or Off.
Basic Data Rates: For
different requirement, you
can select one of the
suitable Basic Data Rates.
Here, default value is
(1-2-5.5.-11Mbps…).
Beacon Interval: Set the
beacon interval of wireless
radio. Do not modify default
value if you don’t know
what it is, default value is
100.
45

Tenda W330R Specifications

General

Bandwidth	2.4 GHz
Input voltage	110 - 240 V
xDSL connection	No
Power requirements	AC 9 V, 1.2 A
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet, WLAN
Ethernet LAN	Yes
Receiver sensitivity	270M: -70dBm@10% PER; 130M: -70dBm@10% PER; 108M: -70dBm@10% PER; 54M: -73dBm@10% PER; 11M: -85dBm@8% PER; 6M: -88dBm@10% PER; 1M: -90dBm@8%
Antenna gain level (max)	2.5 dBi
Ethernet LAN (RJ-45) ports	4
Power consumption (typical)	6 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %