Tenda W330R User Manual

Wireless-N Broadband Router
Check to enable it for
attack prevention.
Remote Web Management
This section is to allow the
network administrator to
manage the Router
remotely. If you want to
access the Router from
outside the local network,
please select the “Enable”.
Enable: Check to enable
remote web management.
Port: The management
port open to outside
access The default value
is 80.
WAN IP Address: Specify
the range of the WAN IP
address for remote
management.
72

Tenda W330R Specifications

General

Bandwidth	2.4 GHz
Input voltage	110 - 240 V
xDSL connection	No
Power requirements	AC 9 V, 1.2 A
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet, WLAN
Ethernet LAN	Yes
Receiver sensitivity	270M: -70dBm@10% PER; 130M: -70dBm@10% PER; 108M: -70dBm@10% PER; 54M: -73dBm@10% PER; 11M: -85dBm@8% PER; 6M: -88dBm@10% PER; 1M: -90dBm@8%
Antenna gain level (max)	2.5 dBi
Ethernet LAN (RJ-45) ports	4
Power consumption (typical)	6 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %