Tenda W330R User Manual

Wireless-N Broadband Router
Chapter 1: Introduction
Thank you for choosing the W330R Wireless-N Broadband
Router. W330R utilizes advanced MIMO technology and
increases over 8 times transmission range of ordinary
802.11g products. Compatible with IEEE802.11n (Draft 2.0)
and IEEE802.11g/b standards, it can provide up to 300Mbps
stable transmission rate. Additionally, it integrates router,
wireless access point, four-port Gigabit switch and firewall in
one. In addition, its extraordinary intelligent software, Setup
Wizard, makes the device’s installation more convenient.
It supports WDS (Wireless Distribution System) function for
repeating and amplifying the signals to extend the wireless
network coverage. Besides, it can disable SSID broadcast
manually. WPS (PBC and PIN) encryption method, port filter
and MAC address filter can protect your network from
malicious attack. W330R can be managed through
local/remote Web management interface anywhere.
Moreover, the WMM function can make your voice and video
more smooth. Powerful and exquisite, it is the best choice for
SOHOs and small-sized enterprises to share the wireless
network.
1

Tenda W330R Specifications

General

Bandwidth	2.4 GHz
Input voltage	110 - 240 V
xDSL connection	No
Power requirements	AC 9 V, 1.2 A
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet, WLAN
Ethernet LAN	Yes
Receiver sensitivity	270M: -70dBm@10% PER; 130M: -70dBm@10% PER; 108M: -70dBm@10% PER; 54M: -73dBm@10% PER; 11M: -85dBm@8% PER; 6M: -88dBm@10% PER; 1M: -90dBm@8%
Antenna gain level (max)	2.5 dBi
Ethernet LAN (RJ-45) ports	4
Power consumption (typical)	6 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %