EasyManuals Logo
Home>TermaTech>Wood stove>TT20 Series

TermaTech TT20 Series User Manual

TermaTech TT20 Series
Go to English
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
51
TermaTech A/S, Gunnar Clausens Vej 36, DK-8260 Viby J www.termatech.com 21-12-2023 LP Item no. 99-274
9 Environment, Climate & Disposal
When disposing of your wood stove or the packaging from your wood stove, it's important to dispose of the parts separately. Below
is how this should be done correctly and in the most environmentally friendly manner. All parts of the packaging and most parts of
the wood stove itself can be recycled.
Cardboard:
The cardboard used for packaging is 100% recyclable paper and should be sorted and recycled through your local waste/recycling
station or waste management partner according to their guidelines.
Plastic and Styrofoam:
The plastic and Styrofoam used for packaging should be sorted according to your local waste/recycling station or waste
management partner's guidelines for proper disposal.
Wooden Pallet/Framing:
The wood and pallet used for packaging (meeting requirements/certification) should be sorted and recycled through your local
waste/recycling station or waste management partner's guidelines.
Vermiculite/Insulation Panels/Gaskets:
Cannot be recycled and should be sorted through your local waste/recycling station or waste management partner's guidelines.
Glass:
If you replace or dispose of the glass from your wood stove, it should not be discarded with regular glass waste as it is ceramic
glass (dispose of it as ceramics).
Stone Cladding:
Cannot be immediately recycled and should be sorted through your local waste/recycling station or waste management partner's
guidelines (dispose of it as natural stone).
The Stove:
All other parts of your stove are made of either steel or cast iron and should be sorted and recycled through your local
waste/recycling station or waste management according to their guidelines.
10 Approval & Technical Specifications
TEKNOLOGISK INSTITUT, Energi og Klima
Vedvarende Energi og Transport
Kongsvang Allé 29
8000 Aarhus C
www.teknologisk.dk
The wood stove series has been tested and approved according to the standards:
CE - EN13240 (EU)
DIN+ (Germany)
15A (Austria)
NS3058, 3059 (Norway)
AEA (UK)
Ecodesign 2015/1185
UKCA Certified
Dimensions of the combustion chamber are:
Height 166mm (to Max load)
Depth 228mm
Width 340mm
Volume: 0.0129 m³ (Effective combustion chamber volume)
The flue outlet diameter is: 150mm
Mean values during testing:
Flue gas temperature: 313°C (Measured at the flue outlet at 20°C room temperature)
Flue gas mass flow: 4,2 g/s
Efficiency 81%
Annual Efficiency: 71%
Power: 5KW
CO: 0,064% or 800 mg/nm3 v/13% O2
Chimney draft 12Pa

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TermaTech TT20 Series and is the answer not in the manual?

TermaTech TT20 Series Specifications

General IconGeneral
BrandTermaTech
ModelTT20 Series
CategoryWood stove
LanguageEnglish

Related product manuals