7. Programming
24
Start and Stop:
Click on
Start
to start a measuring program..
This function can only be selected if
PC start
has been selected as
Start criterion
.
Click on
Stop
to end a measuring program.
This function can only be selected if a measurement is
running.
Programming ended
Click on
Apply
to transmit the programming to the data logger.
A measuring program can only apply in the data logger if it is
in the
Wait
or
End
mode.
If a measurement is running (
Record
mode):
Finish the measurement by clicking on
Stop.
- The
Programming data
window opens to confirm the following
programming.
7.6 Closing the connection
1 Click on the connection you wish to close with your right
mouse button in the
Data
window.
2 Select
Close
.
- The connection to the data logger is closed.
To Next Page
Loading...
Need help?
General
