34
12. Accessories/Spare parts
Description Part no.
testo 177-T1 (1 channel temp. internal, wall holder, calibration protocol) 0563 1771
testo 177-T2 (1 channel temp. internal, display, wall holder, calibration protocol) 0563 1772
testo 177-T3 (4 channel temp. internal/external, display, switch (e.g. for door contact), 0563 1773
wall holder, calibration protocol)
testo 177-T4 (4 channel temp. external (T/C), display, wall holder, calibration protocol) 0563 1774
testo 177-H1 (3 channel humidity/temp. internal/external, display, wall holder, 0563 1775
calibration protocol)
testo 580 data collector incl. desk-top holder for testo 175/177 data loggers 0554 1778
testo 575 fast printer, infrared controlled thermal line printer with 0554 1775
graph function, incl. 1 roll of thermal paper and batteries
Thermal paper for printer (6 rolls) 0554 0569
Thermal paper for printer (6 rolls) for long-term legible data documentation 0554 0568
up to 10 years
Self-adhesive label thermal paper for printer (6 rolls) 0554 0561
testo ComSoft 3 Basic Software Set for testo 175 incl. interface, desk-top holder and 0554 1774
PC connection cable
testo ComSoft 3 Professional Software (without interface) 0554 0830
Interface for testo 175/177 incl. desk-top holder and PC connection cable 0554 1757
Lock to secure testo 175/177 data logger in the wall holder 0554 1755
Retainer key to prevent testo 175/177 data logger from falling out of wall holder 0192 0638
Spare desk-top holder for testo 177 data logger 0554 1772
Spare wall holder for testo 177 data logger 0554 1771
Spare battery 1 AA (3.6V/1.9Ah) for testo 177 0515 0177
Transport case for up to 5 testo 177 data loggers and accessories 0516 1770
For testo 177-H1: metal protection cage for humidity probe, V4A stainless steel, 0554 0755
for velocities below 10m/s
For testo 177-H1: Cap with mesh wire filter 0554 0757
For testo 177-H1: Teflon sintered filter, for corrosive substances, high humidity range 0554 0756
(long-term measurements), high velocities
For testo 177-H1: Stainless steel sintered caps, to screw on humidity probe, 0554 0647
For high velocities or dirty air
For testo 177-H1: Control and adjustment set 11.3%RH/75.3%RH, incl. adapter 0554 0660
To Next Page
Loading...
Need help?
General
