ADS1256EVM-PDK Kit Operation
www.ti.com
26
SBAU090E–November 2003–Revised November 2018
Submit Documentation Feedback
Copyright © 2003–2018, Texas Instruments Incorporated
ADS1256EVM and ADS1256EVM-PDK
space
2. Select ADS1256EVM from the EVM drop-down menu. The ADS1256EVM-PDK plug-in appears in the
left pane, as Figure 22 shows.
Figure 22. ADS1256EVM-PDK Plug-In Display Window
3. The ADS1256EVM-PDK plug-in window has a status area at the top of the screen. When the plug-in is
first loaded, the plug-in searches for the board. You will see a series of messages in the status area
indicating this action.
4. If you have not yet loaded the operating system drivers, Windows will display the Windows Install New
Driver Wizard sequence (illustrated in Figure 23 through Figure 27). Accept the default settings.
NOTE: During the driver installation, a message may appear indicating the firmware load has
TIMED OUT. Click OK and continue driver installation. The plug-in will attempt to download
the firmware again once the driver installation completes.
To Next Page
Loading...
Need help?
General
