www.ti.com
Evaluating Performance with the ADCPro Software
31
SBAU090E–November 2003–Revised November 2018
Submit Documentation Feedback
Copyright © 2003–2018, Texas Instruments Incorporated
ADS1256EVM and ADS1256EVM-PDK
9.1.1 MUX Tab
The first tab of the ADS1256EVM plug-in is the MUX tab. In the tab, two columns of push buttons are
used to select the positive and negative inputs for ADS1256. This selection, combined with switches S1
and S2, selects the measurement for the inputs applied to the analog interface J1. The MUX tab is shown
in Figure 30.
Figure 30. MUX Tab
To Next Page
Loading...
Need help?
General
