Texas Instruments LMK04828 User Guide

Using TICS Pro to Program the LMK0482x www.ti.com
14
SNAU145B–MAY 2013–Revised March 2018
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
LMK04826 and LMK04828 User’s Guide
5.4 Restoring a Default Mode
Click “Default configuration” → “CLKin1 122,88 MHz, OSCin 122.88 MHz”; then
Press “Ctrl+L”
Figure 9. Setting the Default Mode for LMK04828
For the purpose of this walkthrough, a default mode will be loaded to ensure a common starting point.
This is important because when TICS Pro is closed, it remembers the last settings used for a particular
device. Again, remember to press “Ctrl+L” as the first step after loading a default mode.
5.5 Visual Confirmation of Frequency Lock
After a default mode is restored and loaded, LED D4, and D5 must illuminate when PLL1 and PLL2 are
locked to the reference clock applied to CLKin1. This assumes PLL1_LD_MUX = PLL1_DLD,
PLL2_LD_MUX = PLL2_DLD and PLLX_LD_TYPE = Output (Push-Pull).

Texas Instruments LMK04828 Specifications

General

Brand	Texas Instruments
Model	LMK04828
Category	Motherboard
Language	English