www.ti.com
Set Modes Page
23
SNAU145B–MAY 2013–Revised March 2018
Submit Documentation Feedback
Copyright © 2013–2018, Texas Instruments Incorporated
TICS Pro Usage
A.5 Set Modes Page
The Set Modes page allows the user to quickly configure the LMK0482x into a desired mode. If the
LMK0482x is already in the desired mode, or several registers already programmed as needed, the log
won’t display any or many register writes.
The top LMK0482x modes section allows the user to set high level usage profiles to allow the device to
operate in dual loop, single loop, or distribution mode.
The bottom LMK0482x sub-modes section allows further JESD204B configuration, 0-delay configuration,
or clock input configuration which may apply for many of the LMK0482x modes of operation.
Figure 13. TICS Pro - Set Modes Page
To Next Page
Loading...
Need help?
General
