EasyManuals Logo
Home>Toro>Control Systems>Lynx

Toro Lynx User Manual

Toro Lynx
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
35
Specifying Information—DL2000
®
Model Number Description
SSDS-LF-500
SSDS-HF-1000
RGP-212-05
DL2000 500' Subsurface Drip System—Low Flow
DL2000 1000' Subsurface Drip System—High Flow
DL2000 500’ (Roll, 0.5 GPH), 12” Spacing
DL2000
®
Subsurface
Drip Irrigation System
Features
• Pressure compensating emitters
• Each emitter is impregnated with Treflan, a root inhibitor
that prevents roots from entering and clogging the emitter
opening
• The airjection system draws a measured amount of air into
the system to deliver oxygen rich water directly to the root
zone to promote healthy plant growth
• The air relief valve opens at the end of every watering cycle
allowing clean air to enter the system and eliminate emitter
clogging from siphoning
• Applies water directly to the root zone allowing turf to stay
dry
• Uniformly applies water to areas such as fingers
• Minimizes runoff
• Eliminates overspray into bunker keeping sand dry
• Cycle/soak allows for application on steep slopes
• Reduces bunker cave-ins
• Saves time, labor and money by eliminating the need for
hand-watering
Drip System Specifications
• Flow range:
• Low flow: 0,4 to 30,3 LPM (0.1 to 8.0 GPM)
• High flow: 7,6 to 75,7 LPM (2.0 to 20.0 GPM)
• DL2000 range:
• Low flow: 3,7m to 304,8m (12’ to 1000’)
• High flow: 76,2m to 762m (250’ to 2500’)
• Pressure compensating emitter: 1,9 LPH (0.5 GPH)
• DL2000 Maximum run length: 76,2m (250’)
• Application rate 30,48cm (12” x 12”) spacing:
21 mm/h (0.85”/h)
System Components
• DL2000 subsurface dripline
• Low Flow system – 152,4m (500’)
• High Flow system – 304,8m (1000’)
• Drip Zone Valve Kit – includes control valve, pressure
regulator, Y-filter and manual ball valve
• Air Vent Assembly – pre-assembled and ready to install for
labor savings
• Required inlet/outlet fittings
• Flush Assembly Fittings 8 GPM (2 psi) sealing flush valve
• Installation Fittings:
• Includes Toro exclusive Loc-Eze® tees, couplings, elbows
and end clamps
• 3,1m (10’) of Blue Stripe® polyethylene tubing
• Soil staples for secure tubing placement
• Pipe thread tape
Warranty
• 2 Years

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toro Lynx and is the answer not in the manual?

Toro Lynx Specifications

General IconGeneral
BrandToro
ModelLynx
CategoryControl Systems
LanguageEnglish

Related product manuals