36
Sprinkler Tools
995-15 Selector tool
• All electric golf sprinklers
• Allows user to manually turn the
sprinkler “ON”, turn or leave it
“OFF” or place it into the “AUTO”
position awaiting a command from
the controller
995-83 Multi Purpose tool
• All Golf sprinklers
• Riser pull up for DT and 800S Series.
• Riser screen removal on all models.
• Upper snap ring remover on all
models
995-100 Valve snap ring pliers
with screen remover
• All Golf sprinklers Lower snap ring
removal on all models
• Rock screen removal on all DT and
800S Series
• Valve removal on all models
995-82 Arc adjustment tool,
3/32” allen wrench
• 765, 785, 865S, 885S Arc
adjustment of the part circle drives
• DT Series Adjustment of the radius
reduction screw
Nut Drivers
• 995-105 5/16” nut driver DT and
800S Series Trujectory adjustment on
835S/855S models
• Inner, intermediate and back
nozzle removal on all DT and 800S
models
• 995-99 5/8” nut driver DT and
800S Series Dual trajectory selection
on all DT models
• Main nozzle removal on all DT and
800S models
• 995-79 7/16” nut driver 834S/854S
pre August 2007
• Inner, intermediate and back
nozzle removal
• 650/760/780/860S/880S Inner,
intermediate and back nozzle
removal
• 995-81 9/16” nut driver 760/780
Series Main nozzle removal
• 995-80 1/2” nut driver
760/780/860S/880S Nozzle base
jam nut removal
• 995-52 1/4” nut driver 660/680
Drive plate nut removal
• 995-53 3/8” nut driver 660/680
Cap nut removal
Valve Insertion Tools
• 995-35 valve insertion tool, 640
• Aligns and installs valve into the
640 VIH body
• 995-76 valve insertion tool, all
25mm (1”) golf models
• Aligns and installs valve into the
25mm (1”) golf body
• 995-101 valve insertion tool, all
40mm (1.5”) golf models
• Aligns and installs valve into the
40mm (1.5”) golf body
• 995-12 valve insertion tool, 690
• Aligns and installs valve into the
690 body
• 995-20 valve insertion tool, 690 w/
rubber cover
• Aligns and installs valve into the
690 body w/ rubber cover
Valve Removal Tools
• 995-08 valve removal tool, 25mm
(1”). All 25 mm (1”) golf models
and 640
• Removes valve from the body of
all 25 mm (1”) golf sprinklers and
the 640
• 995-09 valve removal tool, 40mm
(1.5”). All 40mm (1.5”) models and
690.
• Removes valve from the body of
all 40mm (1.5”) golf sprinklers
and the 690
Riser Removal Tools
• 995-06 drive assembly extraction
tool 630, 650 and 690 models
• Threads into the nozzle base and
allows removal of the drive from the
body
• 995-85 drive assembly extraction
tool 730, 750, 760, 780, 860S, 880S
• Threads onto the drive output shaft
and allows removal of the drive from
the body
Riser Hold Up Tools
• 995-55 Riser hold up tool, all 700
models
• Holds riser up to allow for nozzle
servicing
• 995-102 Universal hold up tool, all
700, 800S and DT models
• Holds riser up to allow for nozzle
servicing
89-7350 Adjustment Key,
720/720G
• Adjusts flow, arc and trajectory
• Removes riser snap ring
Yardage Markers
• YARDMARKYEL
• Yellow Yardage markers for
834S/854S; DT34/DT54; DT35/
DT55; 730/750; 750/780; 855RB;
DT91RB; DT55RB
• YARDMARKLAV
• Lavender Yardage markers for
834S/854S; DT34/DT54; DT35/
DT55; 730/750; 750/780; 855RB;
DT91RB; DT55RB
To Next Page
Loading...
Need help?
General
