5
Lynx™ Central Control System
Features
• Supports 16 languages: Bulgarian, Simplified Chinese,
Czech, Danish, Dutch, English, French, German, Italian,
Japanese, Korean, Norwegian, Portuguese, Russian, Spanish
and Swedish
• Intuitive Area and Hole orientation allows you to control
your irrigation system the same way you think about the
course
• Instant Program has simple check-box selection and
Dynamic Drilldown so you can instantly create and
personalize new irrigation programs*
• Dynamic Drilldown enables area, hole or station views in
Watering Plan and Course Report screens
• Course Report provides both real time and daily summaries
of both scheduled and manual watering events. Take the
guesswork out of knowing how your system performed
• Control your irrigation by setting runtime minutes or
amount (mm or in) and let the system calculate the other.
See exactly how much water you will apply and how long
you will irrigate each area
Features (continued)
• Turf Guard integration helps you determine when to
irrigate and how much
• Create and edit your own interactive digital map
• Fully supports CAD-generated maps Integrated run time
display shows past and planned irrigation activity so you
can easily determine what action to take
• With Quick Start, you create station, hardware and area
associations, and control the definition of greens, tees,
fairways and sprinklers based on their locations
• A basic hydraulic tree is auto-generated for you during
Quick Start
• Projected Flow view shows you areas that will be watered
and how much will be applied
• Pump station monitoring helps ensure sprinkler
performance and prevent wasted water or energy
• Runtime synchronization with Network VP® satellites
prevents irrigation outages if the central goes offline
• Current-sensing capabilities notify you of wire cuts and
sprinklers unintentionally turned off**
• Runtimes are executed to the second rather than rounding
to the whole minute, resulting in more precise irrigation
and water savings**
• Constant communication with Network VP satellites lets
you take action if a power outage threatens irrigation**
• GDC communication and solenoid diagnostics help identify
shorts, low voltage and other issues
• Weather station integration and Hand-held Remote
Interface support are included as standard features
Warranty
• 1, 3 and 5 year renewable NSN support
Specifying Information—Lynx
LX-0X-1-XX
Type Computer Hardware Service
Level
Field Hardware
LX 0X 1 X X
LX—Lynx 0— Budget Computer
1— Standard Computer
1— 1-year NSN (Standard) 2— SE
3— PE
4— CE
1— OSMAC/E-Series OSMAC
3—Network VP
E
7—Network VP
8—Network GDC
Example:
When ordering a Lynx PE Central with a standard computer and one year of NSN using Network VPE field hardware, you would order:
LX-01-1-33
* Available only in PE and CE levels
** Network VP and VP
E models only
Specification Lynx SE Lynx PE Lynx CE
Maximum Satellites 500 500 500
Maximum Sat. Sations 512 1,344 32,000
Maximum GDC Stations 500 1,000 6,400
Map Interface Standard Standard Standard
Hand Held Radio Interface Software Standard Standard Standard
Maximum Weather Stations 10 10 10
Maximum Pump Stations 2 3 6
Turf Guard Soil Sensor Integration Standard Standard Standard
Communication Modes Wireless digital paging, 2-way wired, 2-way wireless, hybrid
Platforms Supported Network VP, Network VP
E, GDC, OSMAC
Number of Courses 1 2 3
Quick Start Standard Standard Standard
Operating System Windows 7 Windows 7 Windows 7
NEW
To Next Page
Loading...
Need help?
General
