17
Introduction
Getting started
Basic operation
Reference section
Equipment
connections
ViewingTeletext
Using the TV’s
features
Getting started
Programming channel memory
• First, use the Auto Programme function to preset all the active channels in your area automatically. Then, arrange the
preset channels with the Manual Programme function so that you can tune into only desired channels.
•
Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will
be able to use the
or buttons to scan the stations you have programmed. Stations can be tuned using automatic
or manual modes.
System selection/Auto programme
Press the MENU button, then
press the
or button to
display the Channel menu.
Press the OK button, then press
the z or y button to select
Auto programme.
Press the OK button to display the Auto programme menu.
Continue to set each item following the steps described below.
System:
Press the z or y button to
select System, then press the
OK button.
Select a TV system with the z or y button on the System
menu;
B/G : PAL B/G, SECAM B/G (Europe/East Europe)
I : PAL I/II (U.K./Ireland)
D/K : PAL D/K, SECAM D/K (East Europe)
L : SECAM L/L’ (France)
M : NTSC
Press the OK button.
Storage from:
Press the z or y button to select Storage from, then press the
OK button.
Select the beginning programme position with the or
button or Number button. Any number under 10 is entered
with a numeric “0” in front of it, i.e. “05” for 5.
Press the OK button.
Search:
Press the z or y button to select Search.
Press the OK button to begin
auto programming.
All receivable stations are
stored.
To stop auto programming,
press the MENU button.
When auto programming is completed, the Channel menu
appears on the screen automatically.
213
546
87
9
0
CALL
MENU EXIT
P
P
OK
Note:
In Australia, if no station name can be
assigned to a station, the channel number
is assigned and stored as - - - - - followed
by a number. See “To change or create
station labels:” on page 19 to assign the
station name.
C10 B/G
5 5 %
Auto programme
MENU EXIT
System
Storage from
Search
To set
Auto programme
Manual programme
MFT
AFT
Blue screen
Channel
OK MENU EXIT
Auto programme
System
Storage from
Search
B/G
I
D/K
L
M
MENU EXIT
To Next Page
Loading...
Need help?
General
