35
Introduction
Getting started
Basic operation
Reference section
Equipment
connections
ViewingTeletext
Using the TV’s
features
Equipment connections
PC Setting
You can adjust the horizontal/vertical picture position, clock (to minimize vertical stripes on the screen), and phase
(to remove horizontal noise and sharpen the picture). You can auto-configure and reset these settings.
Picture position/Clock/Phase adjustments
First, start up the computer connected to the TV, then press the
button repeatedly to select the PC input mode (see page 25).
Press the MENU button, then
press the
or button to
display the PC menu.
Press the OK button, then press
the z or y button to select the
desired item.
Press the OK button, then press
the
or button to make
appropriate adjustments.
• H-Position / V-Position
Use this function to adjust the picture to the left/right and
up/down as you prefer.
• Clock
Use this function to minimize any vertical bars or stripes
visible on the screen background. The horizontal screen
size will also change.
• Phase
Use this function to remove any horizontal noise and
sharpen the image of characters.
213
546
87
9
0
CALL
MENU EXIT
P
P
OK
PC
H-Position
V-Position
Clock
Phase
Auto Configure
Reset
OK MENU EXIT
H-Position 76
PC
H-Position
V-Position
Clock
Phase
Auto Configure
Reset
OK MENU EXIT
Note:
The optimum points of the clock and
phase adjustments will vary according to
the input signals.
To Next Page
Loading...
Need help?
General
