Chapter 5: Setting up your TV
30
1無
> Settings > SETUP > Auto Tuning > .
A confirmation screen appears.
2無
Press to start Auto Tuning or to abort.
The TV cycles through all the channels, and stores
all active channels in memory.
To view the programmed channels, press or .
Manual Tuning
After storing channels in memory, you can manually
enter channels if the channel number is known.
1無
> Settings > SETUP > Manual Tuning > .
2無
Use buttons 0–9 on the remote control to enter the
channel number (for example, 56). Press .
3無
Press to start Manual Tuning.
The channels found are listed at the bottom of the
screen.
Type Description
ATV Analog channel
DTV Digital channel
Skipping channels
To prevent a channel from being viewed, you can set
it to be skipped.
1無
> Settings > SETUP > TV Settings > .
2無
Press
p or q
to select Channel Options. Press .
The list of channels appears.
3無
Move to the column. Press
p or q
to select a
channel to skip. Press . The box is selected. To
clear the selection, press .
Note: You cannot tune skipped channels using
or
. Use buttons 0–9 and on the remote control.
Skipping video inputs
You can set video inputs to be skipped when selecting
inputs in the Input selection window.
To turn on skip:
1無
> Settings > PREFERENCES > AV Connection
> .
2無
Press
p or q
to select Input Labeling. Press .
3無
Press
p or q
to select the item you want to be
skipped. Press the RED button to turn on Skip.
To turn off skip:
Press again the RED button to turn off Skip.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
