Chapter 6: Basic features
37
Setting the PIN code
A PIN code is necessary for some menus.
Note: The Parental Control and Locks menu is
grayed out if no PIN has been set.
Entering a new PIN code
1無
> Settings > PREFERENCES > PIN Setting >
.
2無
Use the number buttons to enter a 4-digit number.
Confirm the code.
Note: The PIN code cannot be set to “0000”.
Changing or deleting your PIN code
1無
> Settings > PREFERENCES > PIN Setting >
.
2無
Use the number buttons to enter your 4-digit PIN
code.
3無
Select Change PIN or Delete PIN. Press .
Note:
•
The PIN code cannot be set to “0000”.
•
If you delete the PIN code, the settings of
Parental Controls and Locks are reset.
Forgotten PIN code
1無
> Settings > PREFERENCES > PIN Setting >
.
2無
Press 4 times within 5 seconds. The code is
cleared.
3無
Enter a new PIN code.
Using parental controls
Blocking TV programs and movies by
rating (V-Chip)
Some TV programs and movies include signals that
classify the content of the program as unsuitable for
younger viewers. The V-Chip feature in this TV detects
the signals and blocks the programs according to the
ratings you select.
Note: The V-Chip feature in this TV supports the
U.S. V-Chip system only.
1無
> Settings > PREFERENCES > Parental
Control and Locks > .
2無
Enter your 4-digit PIN code.
3無
Press
p or q
to highlight Enable Rating Blocking.
4無
Press t or u to select On.
5無
Press
q
to select Edit Rating Limits. Press .
The Edit Rating Limits screen appears.
6無
Press
p
,
q
, t or u.
7無
Press to select a level of blocking.
A box with an “X” indicates a rating that will be
blocked. As you highlight a rating, the rating’s
definition appears at the bottom of the screen.
Note: This feature will be not available if no PIN
code is set.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
