Toshiba 40L310U User Manual

20
Toshiba 40" 1080p 60Hz LED TV
U.S.: http://support.toshiba.com Canada: http://support.toshiba.ca/support/ceg/
Connecting a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see What connection should I use? on page 13.
You can connect a DVD or Blu-ray player using:
•HDMI (best)
• Component video (better)
• AV (composite video) (good)
HDMI (best)
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the back of your TV and to the HDMI OUT jack
on the DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the Input Selection list.
5 Press
S or T to highlight HDMI 1 or HDMI 2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
Back of TV
HDMI cable
DVD or Blu-ray
player
HDMI cable
connector
HDMI jack
On your TV

Toshiba 40L310U Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Screen Size	39.5 inches, 40 inches
Refresh Rate	60hz
Brightness	250 candela per square meter
Surround Sound	dts trusurround
Speakers Output	14 watts
Number Of Speakers	2
USB Ports	1
RF Antenna	yes
Network	none
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
3D	no
Power Consumption	108 kilowatt hours
Depth with Stand	7.5 inches
Height with Stand	22.3 inches
Width with Stand	35.6 inches
Net Weight with Stand	21.8 pounds
Depth without Stand	2.7 inches
Height without Stand	20.2 inches
Net Weight without Stand	21.4 pounds