Toshiba 40L310U User Manual

41
40L310U Toshiba 40" 1080p 60Hz LED TV
U.S.: http://support.toshiba.com Canada: http://support.toshiba.ca/support/ceg/
Turning Amplifier Control on or off
Amplifier control lets you use your TV’s remote
control to control the volume and mute the sound on
an audio receiver.
1 Press MENU, press
S or T to highlight Options,
then press ENTER.
2 Highlight HDMI CEC Control Setup, then press
ENTER.
3 Make sure that Enable HDMI CEC Control is set to
On.
4 Highlight Amplifier Control, then press ENTER.
5 Highlight On or Off, then press ENTER.
6 Press EXIT to close the menu.
Selecting the audio output
Initial Speaker Setting lets you select whether your
TV’s remote control controls the TV speakers or a
connected audio receiver.
1 Press MENU, press
S or T to highlight Options,
then press ENTER.
2 Highlight HDMI CEC Control Setup, then press
ENTER.
3 Make sure that Enable HDMI CEC Control is set to
On.
4 Highlight Initial Speaker Setting, then press
ENTER.
5 Highlight TV or Receiver, then press ENTER.
6 Press EXIT to close the menu.

Toshiba 40L310U Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Screen Size	39.5 inches, 40 inches
Refresh Rate	60hz
Brightness	250 candela per square meter
Surround Sound	dts trusurround
Speakers Output	14 watts
Number Of Speakers	2
USB Ports	1
RF Antenna	yes
Network	none
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
3D	no
Power Consumption	108 kilowatt hours
Depth with Stand	7.5 inches
Height with Stand	22.3 inches
Width with Stand	35.6 inches
Net Weight with Stand	21.8 pounds
Depth without Stand	2.7 inches
Height without Stand	20.2 inches
Net Weight without Stand	21.4 pounds