Toshiba 40L310U User Manual

35
40L310U Toshiba 40" 1080p 60Hz LED TV
U.S.: http://support.toshiba.com Canada: http://support.toshiba.ca/support/ceg/
4 Highlight an option, then press ENTER. Select:
• Video—If an AV device is connected to the
Y/VIDEO jack.
• ColorStream HD—If a component video device
is connected to the Y/VIDEO, P
B, and PR video
jacks.
5 Press EXIT to close the menu.
Setting the RGB range for HDMI jacks
You can select the RGB range for the HDMI jacks.
1 Press MENU, press
S or T to highlight Options,
then press ENTER.
2 Highlight Input Options, then press ENTER.
3 Highlight HDMI 1 RGB Range or HDMI 2 RGB
Range, then press ENTER.
4 Highlight an option, then press ENTER. Select:
• Auto—(Default) Adjusts the RGB full range
signal automatically.
• Full—The RGB input signal is displayed in the
range of 0 to 255.
• Limited— The RGB input signal is displayed in
the range from 16 to 235.
5 Press EXIT to close the menu.
Understanding the basics
This section covers basic information for:
• Turning your TV on or off
• Selecting the video input source
• On-screen menu overview
• Navigating the menus
• Selecting a channel
•Adjusting the volume
• Viewing channel information
• Viewing HDMI information
Turning your TV on or off
1 Make sure that the power cord is connected
securely and correctly. For more information, see
Connecting power on page 31.
2 Press (power) to turn on your TV. The power
indicator turns off.
3 Press (power) again to turn off your TV. Your TV
enters standby mode, and the power indicator
turns red.
Last mode memory
If power is interrupted while you are viewing TV, the
Last Mode Memory feature automatically turns on
your TV when the power is restored.
Note
If your HDMI device does not support the
HDMI RGB Range feature, your TV may not
work correctly when you turn on this
feature.
Warning
When your TV is in standby mode, it is still
receiving power. To completely disconnect
power, unplug the power cord.
Note
If your TV does not receive an input signal
for 15 minutes, it automatically goes into
standby mode.

Toshiba 40L310U Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Screen Size	39.5 inches, 40 inches
Refresh Rate	60hz
Brightness	250 candela per square meter
Surround Sound	dts trusurround
Speakers Output	14 watts
Number Of Speakers	2
USB Ports	1
RF Antenna	yes
Network	none
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
3D	no
Power Consumption	108 kilowatt hours
Depth with Stand	7.5 inches
Height with Stand	22.3 inches
Width with Stand	35.6 inches
Net Weight with Stand	21.8 pounds
Depth without Stand	2.7 inches
Height without Stand	20.2 inches
Net Weight without Stand	21.4 pounds