66
Toshiba 40" 1080p 60Hz LED TV
U.S.: http://support.toshiba.com Canada: http://support.toshiba.ca/support/ceg/
Labeling a video input source
You can add a label to a video input source to make it
easier to identify.
You can also hide a video input source so that it is
grayed on the Input Selection list and your TV skips the
video input source when you press INPUT.
1 Press MENU, press
S or T to highlight Options,
then press ENTER.
2 Highlight Input Options, then press ENTER.
3 Highlight Input Labeling, then press ENTER.
4 Highlight the video input source you want to
label, then press
W or X to select a label from the
list.
5 Repeat steps 3 and 4 to label another input.
6 Press
S or T to highlight Done, then press ENTER
to save the label.
OR
Highlight Reset, then press ENTER to reset the
label to the factory default.
7 Press EXIT to close the menu.
Maintaining
• Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F (5° to 40°C).
• Do not place your TV in direct sunlight or near a
heat source.
This sections includes topics about:
• Cleaning the TV cabinet
• Cleaning the TV screen
Cleaning the TV cabinet
Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the cabinet
with the cloth. Use a clean cloth to dry the cabinet.
Cleaning the TV screen
Clean the screen with a soft, lint-free cloth.
Note
If you are not using an input, you can
select Hide for the label. Hide grays the
input in the Input Selection list and skips
the input when you press INPUT on the
remote control.
Notes
To reset the input labels to the default
labels, highlight Reset, then press ENTER.
To Next Page
Loading...
Need help?
General
