16
Watching TV programmes
Selecting the menu language
Choose from 10 di erent languages (English,
Chinese (CS), Malay, Thai, Vietnamese, Russian,
Arabic, Persian, French or Indonesia) for the on-
screen display.
1 Press MENU, then press or to display
SETUP menu.
Menu Language
Auto Tuning
Location
Quick Setup
Germany
Antenna
Software Licences
Software Upgrade
Manual Tuning
System Information
English
Home
SETUP
2 Press or to select Menu Language.
3 Press or to select the desired language.
Changing the position
1 Enter the desired position number using the
Number buttons on the remote control.
For positions below 10, use 0 and the required
number e.g., for position 1.
1 ABCD
2 You can also change the position by using PU or
Pu.
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
Changing positions between di erent format channels
takes several seconds.
Switching between two positions
You can switch two positions without entering
actual position number each time.
1 Select the rst position you want to view.
2 Select the second position with the Number
buttons (0-9).
3 Press . The previous channel will be displayed.
2 EFGH
3 IJKL Dual
Each time you press , the TV will switch back and
forth between the two positions.
Displaying the on-screen information
1 Press to display the following on-screen
information.
4 ABCD
The information will disappear in 5 seconds.
• Position or external input mode selected
• Position skip on/o information
• Label (if set)
• Mono/Stereo/Dual audio status
2 To erase the display instantly, press again.
Introduction / Getting started
324046PX200SeriesEn.indd16 2012/06/0413:21:47
To Next Page
Loading...
Need help?
General