Toshiba 46PX200 series User Manual

27
Input
Label
--
--
--
--
--
--
--
Input Labeling
EXT 1
EXT 2
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
3 Press  or  to select the item you want to
label and press  or  to select --, Ampli er,
Cable, DVD, Game, PC, Recorder, Satellite or
VCR, or press the RED button to turn on the
skip.
4 Repeat step 3 for other video inputs.
Channel List
1 Press LIST. The Channel List will appear.
Channel List
1
2
3
4
5
6
7
8
2 Press  or  to select a channel, and then
press OK.
Using HDMI CEC Fuction
This feature uses CEC (Consumer Electronics
Controls) technology and allows the control of HDMI
CEC compatible devices from the TV remote control
via HDMI connection (- page 36).
Note:
This feature may not work properly depending on the
connected HDMI CEC compatible device.
HDMI CEC one touch play
When a connected device is turn on CEC will
automatically detect the TV through the input
selection. If the TV is in standby it will be turn on
automatically. This feature is selected in the HDMI
CEC Setup menu.
Note:
Even if the device is showing a menu the TV may
automatically show the video input source on-screen
display.
Using the TV’s features
HDMI CEC system standby
This feature automatically turns the connected
device into standby when the TV goes into standby
and conversely for the TV to switch into standby
when connected device goes into standby.
HDMI CEC system audio control
Using the Speaker Preference feature allows the TV
remote control to adjust the volume or mute the
sound of the speakers connected to the TV via an AV
ampli er.
Ensure that the connected AV ampli er and HDMI
CEC compatible device are selected in the input
source selection and that the Speaker Preference is
set to Ampli er in the HDMI CEC Setup menu or in
the Quick Menu (Speakers).
Notes:
• When you turn on the AV ampli er, change its input
source, or adjust the sound volume, the sound will
be output from the AV ampli er’s speakers even if
TV Speakers has been selected. Turn the TV  rst to
standby and on again to output the sound from the
TV’s speaker.
• The proper function may not work by operating AV
ampli er.
• The above functions are dependent on the
connected device and TV setting.
HDMI CEC functions
When the Enable HDMI CEC is set to On, it allows
the following functions to be enabled by setting
them to On.
• TV Auto Power
If a HDMI CEC device is turned on or o , the TV
turns on or standby automatically.
• Auto Standby
If the TV is set to standby, the TV will send a
message to turn o the selected HDMI CEC
compatible device connected to the TV.
• Initial Speaker Setting
From this item, you can set your audio output
preference to the TV speakers or the AV ampli er
speakers. When this item is set to Ampli er, the
TV remote control can be used to adjust or mute
the volume of the audio.
Notes:
• When you turn on the AV ampli er, change its input
source, or adjust the sound volume, the sound will
be output from the AV ampli er’s speakers even if TV
Speakers has been selected. Turn the TV to standby
and on again to output the sound from the TV’s
speakers.
• The above functions are dependent on the
connected device and TV setting.
324046PX200SeriesEn.indd27 2012/06/0413:21:49

Toshiba 46PX200 series Specifications

General

Brand	Toshiba
Model	46PX200 series
Category	LED TV
Language	English