E6582062ï‚‚
I-3 I. Safety precautions
I
3
9
â– Transportation & installation
Caution
Contact
inhibited
• Do not touch heat radiating fins or discharge resistors.
These devices get high temperature, and you will get burned if you touch them.
Warning
Prohibited
• Do not install and operate the inverter if it is damaged or any of its components is missing.
This will result in electric shock or fire. Please call your Toshiba distributor for repairs.
• Do not place any inflammable object near the inverter.
If flame is emitted due to failure in the inverter, this will lead to fire.
• Do not install the inverter in any location where the inverter could come into contact with water
or other fluids.
• This will result in electric shock or fire.
Mandatory
action
• Operate under the environmental conditions prescribed in the instruction manual.
Operations under any other conditions will result in failure.
• Mount the inverter on a metal plate.
The rear panel will get high temperature. Do not mount the inverter on an inflammable object,
this will result in fire.
• Do not operate the inverter with the front cover removed.
The unit contains high voltage parts and contact with them will result in electric shock.
• An emergency stop device must be installed that is configured in accordance with the system
specifications.
If such an emergency stop device that can activate mechanical brake by shutting off power
supply is not installed, operation cannot be stopped immediately by the inverter alone, thus
resulting in an accident or injury.
• All options to be used must be those specified by Toshiba.
The use of options other than those specified by Toshiba will result in an accident.
• In using a power distribution device and options for the inverter, they must be installed in a
cabinet.
When they are not installed in the cabinet, this will result in electric shock.
To Next Page
Loading...
Need help?
General