Toshiba TOSVERT VFS15-4075PL-W User Manual

E6581611
F-31
6
6.7 Terminal function selection
6.7.1 Keeping an input terminal function always active (ON)
f104 : Always active function selection 1
f108 : Always active function selection 2
f110 : Always active function selection 3
 Function
This parameter specifies an input terminal function that is always to be kept active (ON).
[Parameter setting]
Title Function Adjustment range Default setting
f104
Always active function selection 1
0-7, 10-153: Refer to section 11.6.
8,9: -
0 (No function)
f108
Always active function selection 2
0-7, 10-153: Refer to section 11.6.
8,9: -
0 (No function)
f110
Always active function selection 3
0-7, 10-153: Refer to section 11.6.
8,9: -
6 (ST)

Explanation of the coast stop function
When ST (Standby) is OFF, coast stops.
The default setting for ST (Standby) is ON. Please
change the following settings:
  (no function)
 Assign open input terminal 6: ST (Standby).
Coast stops if terminal set for ST (Standby) is set to
OFF. The monitor on the inverter at this time displays

Motor
speed
ON
OFF
ON
OFF
F-CC
ST-CC
Coast stop
Note1) Input terminal function 8, 9 (Reset command and its inversion) cannot be assigned.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Toshiba TOSVERT VFS15-4075PL-W Specifications

General

Brand	Toshiba
Model	TOSVERT VFS15-4075PL-W
Category	Inverter
Language	English