1 -6
PREPARATION FOR SEWING
3. PREPARATION FOR SEWING
1. Connecting Power Cord
Turn the power switch off when inserting the power plug.
Not doing so could cause an injury.
Hold the power plug when removing it from the outlet.
Not doing so could damage the cord and cause an electric shock, fire or injury.
Do not touch the power plug with wet hands.
Doing so could cause an electric shock.
Connect foot controller and power cord 偋䢢偌 .
倩 Specifications vary from country to country.
倩 Before plugging in your machine, be sure
that the voltage is the same as that of your
machine.(written on a plate at back of ma-
chine).
Press the switch on the machine to turn on the
power and the sewing light.
Always switch off or unplug the machine when
not in use.
Press hard to foot controller, the machine runs
faster.
When the power switch is turned off, the machine
will not operate even by pressing on the foot
controller.
On
Off
Power switch
To Next Page
Loading...
Need help?
General
