Trane BCU Operator Display User Manual

BMTW-SVU02C-EN 59
Chapter 7
Maintaining the Operator-
Display Touch Screen
The only maintenance necessary for the BCU operator display is to
occasionally clean the touch screen (see Figure 51).
Figure 51: BCU Operator-Display Touch Screen
Cleaning the Operator-Display Touch
Screen
To clean the touch screen, wipe it off with a non-abrasive cloth. For more
aggressive cleaning, use a non-abrasive cloth with a mild glass cleaner
solution.
CAUTION
AVOID EQUIPMENT DAMAGE!
Take care not to let any liquid run down into the BCU. Any liquid coming
in contact with the BCU circuit board could cause the touch screen or
the BCU to malfunction.
Operator-display touch
screen

Trane BCU Operator Display Specifications

General

Brand	Trane
Model	BCU Operator Display
Category	Monitor
Language	English