42
General Information
Brake Lever Adjuster - all
except Daytona 675 R
1. Lever (Daytona 675 shown)
2. Adjuster wheel
3. Triangular mark
An adjuster is fitted to the front brake lever.
The adjuster allows the distance from the
handlebar to the lever to be changed to one
of six positions for Daytona 675 and
Street Triple R or four positions for Street
Triple, to suit the span of the operator's
hands.
To adjust the lever, push the lever forward
and turn the adjuster wheel to align one of
the numbered positions with the triangular
mark on the lever holder.
The distance from the handlebar grip to the
released lever is shortest when set to number
six (Daytona 675/Street Triple R), or four
(Street Triple), and longest when set to
number one.
Brake Lever Adjuster -
Daytona 675 R
1. Brake lever
2. Adjusting screw
To adjust the brake lever, push the lever
forward and turn the adjusting screw
counter-clockwise as viewed from the riding
position to increase the distance, or clockwise
to shorten the distance from the handlebar.
1
2
3
cdmj
Warning
For any model, do not attempt to adjust
the lever with the motorcycle in motion as
this may lead to loss of motorcycle control
and an accident.
After adjusting the lever, operate the
motorcycle in an area free from traffic to
gain familiarity with the new lever setting.
Do not loan your motorcycle to anyone as
they may change the lever setting from the
one you are familiar with causing loss of
control and an accident.
cgnc
1
2
To Next Page
Loading...
Need help?
General
